- Home
- About us
- Electrical Services
- Why Test?
- news
- Contact us
WallPod EV : HomeCharge
• ZE Ready 1.2 Tested and Accredited
• Believed to be the lowest priced full mode 3 fast charger in the UK
• OLEV approved
• IP65 weatherproof
• CE Certified
• BSI Certificated
• Corrosion resistant
• UV stabilised
• Incredibly hard-wearing
• Built-in overload and DC sensitive fault current protection
WallPod EV : HomeCharge is a simple, low-cost and easy to install mode 3, 16amp or 32amp EV charging station designed specifically for charging electric vehicles at home. Available in a number of different formats, including:
• J1772 (type 1) tethered lead charging gun
• IEC62196 (type 2) tethered lead charging gun
• IEC62196 (type 2) charging socket complete with hatch-lock
Why not add a 13amp domestic socket to your charging unit for outdoor maintenance or mowing the lawn with ease!
A low-cost EV mode 3 charging station designed for charging electric vehicles at home.
SPECIFICATIONS
• Warm white base unit (other colours available upon request)
• Green service pods (other colours available upon request)
• Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm
• Glow wire rating tested to IEC60695-2-13
• BSI certificated to BS EN 60335-1 for safe use in the home
• Manufactured in compliance with BS7671 wiring regulations
• Compliant with IET EV regulations
• Corrosion resistant
• UV stabilised
• BS EN 60529 : IP65 category 1 certification (weatherproof)
• Operating temperature – 30ºC to + 50ºC
PERFORMANCE
• Easy to install / low maintenance
• Designed to be permanently located indoors or outdoors
• Available in both 16amp (3.6kW) or 32amp (7.2kW)
• Mode 3 IEC61851-1 compliant communication protocol
• Built-in LED charging status indicator
• A built-in 16amp or 32amp RCBO accessible via an IP65 rated access door
• Full overload and DC sensitive fault current protection
• 230V AC / 50Hz
• Multiple supply cable entry points
OPTIONS
• CE approved J1772 (type 1) charging gun c/w 5m tethered lead
• CE approved IEC62196 (type 2) charging gun c/w 5m tethered lead
• CE approved IEC62196 (type 2) charging socket c/w hatch lock
• Optional wall mountable secure charging gun holster (tethered lead versions)
• Optional GPRS communication facility
• Optional facility to lock RCBO access door
• Optional addition of a 13amp outdoor maintenance socket (Multi-mode)
• Optional built-in Class 1 kWh meter
• Optional built-in time clock for charging during cheap rate tariff
• Optional emergency charge facility (time clock option)
• Optional security key-switch control
• Optional corporate branding
• Optional OCPP communication protocol compliant
• Back office management facility
• Eligible for government grant funding (OLEV T&C’s apply)