top of page

Fire Alarm Testing
(FDIS)

Fire Alarm Inspection and Servicing

Elec Cert Limited can provide a full Inspection and servicing program for your fire alarm system.

Why carry out fire alarm maintenance?

All fire systems must be regularly tested and maintenance is essential because it will prolong the life of a system and discover any faults that may occur. A system that is not maintained cannot be guaranteed to protect life and property. The Fire Safety Regulatory Reform Order which came into effect on October 1st 2006 has consolidated requirements of existing fire regulations into one piece of legislation requiring a ‘responsible person or persons’ to implement a fire risk assessment of the premises.

Employers are responsible for their own fire safety risk assessment and have to judge what fire precautions are necessary to protect their employees. There are no longer specific requirements set out in a Fire Certificate to rely on. The only reliable and measurable means of ensuring that your existing fire detection and warning system remains compliant and fully functional is to instigate a plan of regular routine maintenance and testing carried out by a ‘competent’ person supplemented by weekly user tests.

BS5839-1: 2004, recommends weekly user tests consisting of the operation of one manual call point ensuring that the alarm panel processes the fire signal and operates the alarm sounders, with a record of each test in the company’s log book. This should be combined, for Grade A systems, with periodic inspection and testing of the system by a ‘competent’ person based on a risk assessment.

The recommended interval between these inspections should not exceed six months.

Why choose Elec Cert Limited?

  • All Elec Cert engineers hold DBS enhanced disclosures

  • All Elec Cert engineers are fully conversant with the requirements of BS 5839-1:2002 and directly employed by ourselves

  • All tests are carried out with minimal disruption to your business

  • Completed certificates can be emailed to clients in PDF format

Elec Cert will provide the following checks to your system as standard:

  • The standby batteries will be disconnected, inspected and load tested

  • The output functions of the control panel will be verified via the operation of one detection device per circuit

  • The operation of all sounders will be verified, sound pressure levels being measured

  • All controls and visual indicators will be energised to ensure operation

  • Each automatic fire detector and manual call point will be tested

Contact Elec Cert Limited:

Unit 6 Oakley Hay Lodge

Great Folds Road

Corby,

NN18 9AS

Tel: 01536 410470 / 0800 2425520

  • Facebook
  • Linkedin
bottom of page